跳到主要内容

cfx 命名空间

JSON-RPC规范说明

GitHub上有一个cfx命名空间的JSON-RPC API规范。 您可以在open-rpc playground中查看它。

惯例

十六进制值编码

有两种关键的数据类型通过 JSON 传递:未格式化的字节数组和数量。 二者都使用十六进制编码传递,但对格式化有不同的要求。

数值

当编码数值(整数,数字)时:使用最紧凑的表示方式编码为十六进制,并加上“0x”前缀。 零应表示为"0x0"。 例如:

  • 0x41(十进制的 65)
  • 0x400(十进制的 1024)
  • 错误样例0x(应该至少有一位数字 - 零是“0x0”
  • 错误样例0x0400(不允许有前导零)
  • 错误样例:ff(缺少0x前缀)

未格式化的数据

当编码未格式化的数据(字节数组、哈希值、字节码数组)时:使用两个十六进制数字表示每个字节,并在前面加上“0x”作为前缀。 例如:

  • 0x41 (size 1, "A")
  • 0x004200 (size 3, "\0B\0")
  • 0x (size 0, "")
  • 错误0xf0f0f(必须是偶数位数)。
  • 错误004200(缺少0x前缀)。

请注意,区块和交易的哈希值是用32个字节来表示的。

Base32 地址

BASE32:Base32 地址应该编码为一个ASCII字符串,包含42个字符加上网络前缀、分隔符和可选字段。 请注意以下关于base32地址作为RPC参数的限制条件:

  • 网络前缀应该与节点的网络匹配,例如:cfx:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp可以发送给主网节点,cfxtest:acc7uawf5ubtnmezvhu9dhc6sghea0403ywjz6wtpg可以发送给测试网节点。 值得注意的是,这两个示例地址对应于不同网络上的同一个账户。
  • 无论包含还是省去地址类型都是可以接受的,例如:cfx:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xgcfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg是等价的。 但是,类型不正确的地址,例如:cfx:type.contract:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg,会被拒绝。
  • 全大写或者全小写地址都是可以接受的,例如:cfx:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xgCFX:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG都是有效的。 但混合大小写地址会被拒绝。

为获取更多关于 Base32 地址的信息,请参阅 地址

默认的 epochNumber (纪元数) 参数

有几个RPC方法有一个epoch number参数。 Epoch的概念在Conflux中有点类似于其他账本中的区块号(高度),但是一个epoch可能包含多个区块。

Epoch number指定了在一个时间点时,系统的相应状态,这些状态受到共识的约束。 Epoch number参数有以下几种可能的选项:

  • HEX String - 整数纪元数。 例如,0x3e8是epoch 1000。
  • String “earliest”表示创世区块的epoch。
  • String “latest_checkpoint”表示存储在内存中的最早的epoch。
  • String “latest_finalized” - 表示最新的已经确定(通过PoS)的epoch。 (添加自conflux-rust v2.0.0
  • String “latest_confirmed” - 表示最新的已经确认的epoch(使用确认计量器的估计值)。
  • string "latest_state" - 表示已经执行的最新纪元。
  • String “latest_mined” - 表示最新的已知epoch。

请注意,由于性能优化,最新的已知epoch没有被执行,所以这些epoch没有可用的状态。 对于大多数与状态查询有关的RPC,推荐使用"latest_state"。 (有关Conflux中交易生命周期的更多信息,请参考交易生命周期

遵循 EIP-1898 的Conflux epochNumber 参数

Conflux core space 支持纪元数参数在 EIP-1898 样式中为某些RPC 服务。 EIP-1898 样式的纪元参数是一个包含3个可选字段的对象:

  • epochNumber. 对应于EIP-1898定义的blockNumber
  • blockHash. 与EIP-1898的blockHash相同。
  • requirePivot. 对应于EIP-1898的requireCanonical。 默认值为true

例如:

{
"blockHash": "0x692373025c7315fa18b2d02139d08e987cd7016025920f59ada4969c24e44e06",
"requirePivot": false
}

EIP-1898中的纪元号参数现在可用于以下RPC:

CURL 请求示例

下面提供了通过向Conflux节点发出 curl 请求来使用 JSON_RPC 应用程序接口的示例。 每个示例都包括对特定端点、其参数、返回类型的描述,以及应该如何使用它的工作示例。

Curl 请求可能会返回与内容类型相关的错误消息。 这是因为 --data 选项将内容类型设置为 application/x-www-form-urlencoded。 如果你的节点确实抱怨此问题,请通过在调用开始时放置 -H "Content-Type: application/json" 来手动设置标头。 这些示例也未包括网址/互联网协议与端口组合,该组合必须是 curl 的最后一个参数(例如 127.0.0.1:12537)。 包含这些附加数据的完整 curl 请求采用以下形式:

$ curl -H "Content-Type: application/json" -X POST --data '{"jsonrpc":"2.0","method":"cfx_clientVersion","params":[],"id":67}' 127.0.0.1:12537

本文档剩余部分的示例将使用 HTTP endpoint。

状态和交易可用性

Conflux的归档节点和全节点会删除历史状态树,以减少存储空间的占用。 全节点也会丢弃历史区块的交易和收据。 因此,一些RPC接口可能无法用于历史查询。

下面是Conflux RPC API的列表,以及它们在归档节点和全节点上的可用性。 *“recent”表示该RPC只支持最近的项目,“OK”*表示它应该对任何有效的输入都能正常工作。

RPC归档节点全节点
cfx_callrecentrecent
cfx_checkBalanceAgainstTransactionrecentrecent
cfx_clientVersionOKOK
cfx_epochNumberOKOK
cfx_estimateGasAndCollateralrecentrecent
cfx_gasPriceOKOK
cfx_getAccountrecentrecent
cfx_getAccumulateInterestRateOKOK
cfx_getAdminrecentrecent
cfx_getBalancerecentrecent
cfx_getBestBlockHashOKOK
cfx_getBlockByEpochNumberOKrecent
cfx_getBlockByHashOKrecent
cfx_getBlockByHashWithPivotAssumptionOKrecent
cfx_getBlockRewardInfoOKrecent
cfx_getBlocksByEpochOKOK
cfx_getCoderecentrecent
cfx_getCollateralForStoragerecentrecent
cfx_getConfirmationRiskByHashOKrecent
cfx_getDepositListrecentrecent
cfx_getInterestRaterecentrecent
cfx_getLogsOKrecent
cfx_getNextNoncerecentrecent
cfx_getSkippedBlocksByEpochOKOK
cfx_getSponsorInforecentrecent
cfx_getStakingBalancerecentrecent
cfx_getStatusOKOK
cfx_getStorageAtrecentrecent
cfx_getStorageRootrecentrecent
cfx_getTransactionByHashOKrecent
cfx_getTransactionReceiptOKrecent
cfx_getVoteListrecentrecent
cfx_sendRawTransactionOKOK

如果您查询的状态条目在节点上不可用,您将收到错误响应:

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBalance","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "earliest"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"error": {
"code": -32016,
"message": "Error processing request: State for epoch (number=0 hash=0x24dcc768132dc7f651d7cb35c52e7bba632eda073d8743f81cfe905ff7e4157a) does not exist: out-of-bound StateAvailabilityBoundary { synced_state_height: 0, lower_bound: 9510001, upper_bound: 9569393, optimistic_executed_height: Some(9569392) }"
},
"id": 1
}

在这个例子中,我们被告知最早可用的状态是在纪元95100010x911c71)处。

从以太坊 JSON-RPC 迁移

以太坊和 Conflux 的一些 JSON-RPC 有对应关系。 即使 JSON-RPC 的细节可能有所不同,但以下映射表在从以太坊迁移到 Conflux 时可能会有所帮助:

以太坊Conflux
eth_blockNumbercfx_epochNumber
eth_callcfx_call
eth_estimateGascfx_estimateGasAndCollateral
eth_gasPricecfx_gasPrice
eth_getBalancecfx_getBalance
eth_getBlockByHashcfx_getBlockByHash
eth_getBlockByNumbercfx_getBlockByEpochNumber
eth_getCodecfx_getCode
eth_getLogscfx_getLogs
eth_getStorageAtcfx_getStorageAt
eth_getTransactionByHashcfx_getTransactionByHash
eth_getTransactionCountcfx_getNextNonce
eth_getTransactionreciptcfx_getTransactionReceipt
eth_sendRawTransactioncfx_sendRawTransaction

GOSSIP, STATE, HISTORY

一些核心的 JSON-RPC 方法需要从 Conflux 网络获取数据,它们可以分为三个主要类别:Gossip, State 和 History。 你可以使用这些部分中的链接跳转到每个方法,或者使用目录来浏览所有方法的列表。

Gossip 方法

这些方法跟踪链的头部。 这是交易在网络中传播、进入区块的方式,以及客户端发现新区块的方式。

  • cfx_getStatus
  • cfx_epochNumber
  • cfx_sendRawTransaction

State 方法

这些方法报告存储的所有数据的当前状态。 “状态”就像一块大的共享内存,包括账户余额、合约数据和 gas 估算。

  • cfx_getBalance
  • cfx_getStorageAt
  • cfx_getNonce
  • cfx_getCode
  • cfx_call
  • cfx_estimateGasAndCollateral

History 方法

获取从创世区块开始的每个区块的历史记录。 这就像一个大型的只追加文件,包括所有区块头、区块体和交易收据。

  • cfx_getBlockByHash
  • cfx_getBlockByEpochNumber
  • cfx_getTransactionByHash
  • cfx_getTransactionReceipt

JSON-RPC 方法

cfx_getTransactionByHash

返回关于一个交易的信息,通过它的哈希来识别。

参数

  1. DATA,32 字节 - 交易的哈希。
params: [
"0x88df016429689c079f3b2f6ad39fa052532c56795b733da78a91ebe6a713944b"
]

返回值

Object - 交易对象,如果没有找到交易,则为 null

  • blockHash: DATA, 32 字节 - 包含并执行了这个交易的区块的哈希。 null 当交易是 pending 时为 null
  • chainId: QUANTITY - 发送者指定的链 ID
  • contractCreated: BASE32 - 创建的合约的地址。 null 当它不是一个合约部署交易时为 null
  • data: DATA - 随交易发送的数据。
  • epochHeight: QUANTITY - 发送者指定的 epoch。 注意这不是包含这个交易的区块的 epoch。
  • from: BASE32 - 发送者的地址。
  • gas: QUANTITY - 发送者提供的 gas。
  • gasPrice: QUANTITY - 发送者以 Drip 为单位提供的 gas 价格。
  • hash: DATA, 32 Bytes - 交易的哈希。
  • nonce: QUANTITY - 发送者在这之前发送的交易数量。
  • r: DATA, 32 字节 - ECDSA 签名 r
  • s: DATA, 32 字节 - ECDSA 签名 s
  • status: QUANTITY - 0 表示成功,1 表示发生错误,2 表示跳过, null null 表示交易被跳过或未打包
  • storageLimit: QUANTITY - 发送者指定的存储限制。
  • to: BASE32 - 接收者的地址。 null 当它是一个合约部署交易时为 null
  • transactionIndexQUANTITY - 表示区块中的交易索引位置。 null 当交易是 pending 时为 null
  • vQUANTITY - ECDSA 恢复 ID
  • valueQUANTITY - 转移的价值,以 Drip 为单位。

注意,字段 blockHash, contractCreated, statustransactionIndex 是由节点提供的,因为它们依赖于交易在账本中的位置。 其余的字段是包含在原始交易中或从原始交易中派生出来的。

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getTransactionByHash","params":["0x497755f45baef13a35347933c48c0b8940f2cc3347477b5ed9f165581b082699"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"blockHash": "0x564750c06c7afb10de8beebcf24411cc73439295d5abb1264d2c9b90eee5606f",
"chainId": "0x2",
"contractCreated": null,
"data": "0x0",
"epochHeight": "0x909c9f",
"from": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
"gas": "0xf4240",
"gasPrice": "0x174876e800",
"hash": "0x497755f45baef13a35347933c48c0b8940f2cc3347477b5ed9f165581b082699",
"nonce": "0x3b518",
"r": "0x14da6cff1a3cd864b04d1b16f480fa023f449322e318b04bb1109b5754b516ce",
"s": "0x304070abe6488c3532ecb66f4be32b88ee35ce48a4607b8d0c86461987a79fc7",
"status": "0x0",
"storageLimit": "0x100",
"to": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
"transactionIndex": "0x0",
"v": "0x1",
"value": "0x3635c9adc5dea00000"
},
"id": 1
}

cfx_getBlockByHash

返回关于一个区块的信息,通过它的哈希来识别。

参数

  1. DATA,32 字节 - 区块的哈希。
  2. Boolean - 如果 true,返回完整的交易对象 如果 false, 只返回交易的哈希值
params: [
"0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331",
true
]

返回值

Object - 区块对象,或 null(当没有找到区块时):

  • adaptive: Boolean - true 则该区块在 GHAST 规则下的权重是自适应的。
  • blame: QUANTITY - 如果为 0,则该区块不责怪其父路径上的任何区块。 如果 n > 0, 则该区块责怪其父路径上的 n n 个前任,例如, 当 n = 1, 则该区块责怪其父区块,但不责怪其父区块的父区块。
  • deferredLogsBloomHash: DATA, 32 Bytes - 在该区块所在 epoch 的延迟执行后的事件地址和事件topic的布隆滤波器的哈希(假设它是主区块)。
  • deferredReceiptsRoot: DATA, 32 Bytes - 在该区块所在 epoch 的延迟执行后的收据的 Merkle 根(假设它是枢轴区块)。
  • deferredStateRoot: DATA, 32 Bytes - 在该区块所在 epoch 的延迟执行后的状态 trie 根三元组的哈希(假设它是枢轴区块)。
  • difficulty: QUANTITY - 该区块的 PoW 难度。
  • epochNumber: QUANTITY - 包含该区块的 epoch 的编号,在节点对账本的视图中。 null 当 epoch 编号未确定时为 null(例如,该区块不在最佳区块的过去集合中)。
  • gasLimit: QUANTITY - 该区块允许的最大 gas。
  • gasUsed: QUANTITY - 该区块使用的总 gas。 null 当区块是 pending 时为 null。
  • hashDATA,32 字节 - 区块的哈希。
  • height: QUANTITY - 区块的高度。
  • miner: BASE32 - 获得挖矿奖励的受益人地址。
  • nonceDATA,8 字节 - 已生成的工作量证明的哈希。
  • parentHashDATA,32 字节 - 父区块的哈希。
  • powQuality: DATA - PoW 质量。 null 当区块是 pending 时为 null。
  • refereeHashes: Array - array of referee block hashes.
  • size: QUANTITY - the size of this block in bytes, excluding the block header.
  • timestamp: QUANTITY - the unix timestamp for when the block was created.
  • transactions: Array - array of transaction objects, or 32-byte transaction hashes, depending on the second parameter.
  • transactionsRoot: DATA, 32 Bytes - the Merkle root of the transactions in this block.
  • custom: Array- customized information. Note from v2.0 custom's type has changed from array of number array to array of hex string.
  • blockNumber: QUANTITY - the number of this block's total order in the tree-graph. null when the order is not determined. Added from Conflux-rust v1.1.5
  • posReference: DATA, 32 Bytes - the hash of the PoS newest committed block. Added from Conflux-rust v2.0.0

Note that the fields epochNumber and gasUsed are provided by the node as they depend on the ledger. The rest of the fields are included in or derived from the block header directly.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockByHash","params":["0x692373025c7315fa18b2d02139d08e987cd7016025920f59ada4969c24e44e06", false],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"adaptive": false,
"blame": 0,
"deferredLogsBloomHash": "0xd397b3b043d87fcd6fad1291ff0bfd16401c274896d8c63a923727f077b8e0b5",
"deferredReceiptsRoot": "0x522717233b96e0a03d85f02f8127aa0e23ef2e0865c95bb7ac577ee3754875e4",
"deferredStateRoot": "0xd449df4ba49f5ab02abf261e976197beecf93c5198a6f0b6bd2713d84115c4ec",
"difficulty": "0xeee440",
"epochNumber": "0x1394cb",
"gasLimit": "0xb2d05e00",
"gasUsed": "0xad5ae8",
"hash": "0x692373025c7315fa18b2d02139d08e987cd7016025920f59ada4969c24e44e06",
"height": "0x1394c9",
"miner": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
"nonce": "0x329243b1063c6773",
"parentHash": "0xd1c2ff79834f86eb4bc98e0e526de475144a13719afba6385cf62a4023c02ae3",
"powQuality": "0x2ab0c3513",
"refereeHashes": [
"0xcc103077ede14825a5667bddad79482d7bbf1f1a658fed6894fa0e9287fc6be1"
],
"size": "0x180",
"timestamp": "0x5e8d32a1",
"transactions": [
"0xedfa5b9c38ba51e791cc72b8f75ff758533c8c38f426eddee3fd95d984dd59ff"
],
"custom": ["0x12"],
"transactionsRoot": "0xfb245dae4539ea49812e822adbffa9dd2ee9b3de8f3d9a7d186d351dcc9a6ed4",
"posReference": "0xd1c2ff79834f86eb4bc98e0e526de475144a13719afba6385cf62a4023c02ae3",
},
"id": 1
}

cfx_getBlockByEpochNumber

返回一个区块的信息,该区块由它的纪元号(epoch number)标识。

参数

  1. QUANTITY|TAG - 纪元号,或字符串"latest_mined""latest_state""latest_confirmed"、"latest_checkpoint""earliest",请参见纪元号参数
  2. Boolean - 如果 true,返回完整的交易对象 If false, only the hashes of the transactions are returned
params: [
"latest_mined",
true
]

返回值

See cfx_getBlockByHash.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockByEpochNumber","params":["latest_mined", false],"id":1}' -H "Content-Type: application/json" localhost:12539

结果参见 cfx_getBlockByHash.


cfx_getBestBlockHash

返回最佳区块的哈希值。

参数

无。

返回值

DATA, 32 Bytes - hash of the best block.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBestBlockHash","id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc" : "2.0",
"result" : "0x7d54c03f4fe971d5c45d95dddc770a0ec8d5bd27d57c049ce8adc469269e35a4",
"id" : 1
}

cfx_epochNumber

返回给定标签对应的纪元号。

参数

  1. TAG - (optional, default: "latest_mined") String "latest_mined", "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter.

返回值

QUANTITY - the integer epoch number corresponding to the given tag.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_epochNumber","params":["latest_mined"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc" : "2.0",
"result" : "0x49",
"id" : 1
}

cfx_gasPrice

返回当前每单位gas的价格,单位为Drip。

参数

无。

返回值

QUANTITY - 当前 Gas 价格的整数表示,单位为 Drip。

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_gasPrice","id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc" : "2.0",
"result" : "0x09184e72a000",
"id" : 1
}

cfx_getBlocksByEpoch

返回指定纪元中的区块哈希值。

参数

  1. QUANTITY|TAG - 纪元号,或字符串"latest_mined""latest_state""latest_confirmed"、"latest_checkpoint""earliest",请参见纪元号参数

返回值

数组 - 区块哈希的数组,按照它们的执行(拓扑)顺序排序。 请注意,最后一个哈希值是主轴哈希。

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlocksByEpoch","params":["0x11"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": [
"0x618e813ed93f1020bab13a1ab77e1550da6c89d9c69de837033512e91ac46bd0",
"0x0f6ac81dcbc612e72e0019681bcec32254a34bd29a6bbab91e5e8dc37ecb64d5",
"0xad3238c00456adfbf847d251b004c1e306fe637227bb1b9917d77bd5b207af68",
"0x0f92c2e796be7b016d8b74c6c270fb1851e47fabaca3e464d407544286d6cd34",
"0x5bcc2b8d2493797fcadf7b80228ef5b713eb9ff65f7cdd86562db629d0caf721",
"0x7fcdc6fff506b19a2bd72cd3430310915f19a59b046759bb790ba4eeb95e9956",
"0xf4f33ed08e1c625f4dde608eeb92991d77fff26122bab28a6b3a2037511dcc83",
"0xa3762adc7f066d5cb62c683c2655be3bc3405ff1397f77d2e1dbeff2d8522e00",
"0xba7588476a5ec7e0ade00f060180cadb7430fd1be48940414baac48c0d39556d",
"0xe4dc4541d07118b598b2ec67bbdaa219eb1d649471fe7b5667a0001d83b1e9b6",
"0x93a15564544c57d6cb68dbdf60133b318a94439e1f0a9ccb331b0f5a0aaf8049"
],
"id": 1
}

cfx_getBalance

返回给定账户的余额,该账户由它的地址标识。

参数

  1. BASE32 - address to check for balance.
  2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
"latest_state"
]

返回值

QUANTITY - 当前余额的整数表示,单位为 Drip。

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBalance","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x0234c8a3397aab58", // 158972490234375000
"id": 1
}

cfx_getStakingBalance

返回给定账户的质押余额,该账户由它的地址标识。

参数

  1. BASE32 - 用于检查质押余额的地址,采用 base32 编码。
  2. QUANTITY|TAG - (可选,默认为"latest_state")整数纪元号,或字符串 "latest_state""latest_confirmed""latest_checkpoint""earliest",详见 纪元号参数
params: [
"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
"latest_state"
]

返回值

QUANTITY - integer of the current staking balance in Drip.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getStakingBalance","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x0234c8a3397aab58", // 158972490234375000
"id": 1
}

cfx_getCollateralForStorage

返回给定地址的抵押存储的大小,单位为字节。

参数

  1. BASE32 - 要检查抵押存储的地址。
  2. QUANTITY|TAG - (可选,默认为"latest_state")整数纪元号,或字符串 "latest_state""latest_confirmed""latest_checkpoint""earliest",详见 纪元号参数
params: [
"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
"latest_state"
]

返回值

QUANTITY - integer of the collateral storage in Byte.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getCollateralForStorage","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x0234c8a8",
"id": 1
}

cfx_getAdmin

返回指定合约的管理员。

参数

  1. BASE32 - 合约地址
  2. QUANTITY|TAG - (可选,默认为"latest_state")整数纪元号,或字符串 "latest_state""latest_confirmed""latest_checkpoint""earliest",详见 纪元号参数
params: [
"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"latest_state"
]

返回值

BASE32 - address of admin, or null if the contract does not exist.

备注

Although meaningless, it is also possible to use user address as the input parameter of cfx_getAdmin method. In this case, the return value will be zero address if the input user address exists in the world state, else null will be returned.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getAdmin","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
"id": 1
}

cfx_getCode

返回指定合约的代码。 如果合约不存在,将返回0x0

参数

  1. BASE32 - 合约地址
  2. QUANTITY|TAG - (可选,默认为"latest_state")整数纪元号,或字符串 "latest_state""latest_confirmed""latest_checkpoint""earliest",详见 纪元号参数
params: [
"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"latest_state"
]

返回值

DATA - byte code of the contract, or 0x if the account has no code.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getCode","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x6080604052600436106100705760003560e01c80638da5cb5b1161004e5780638da5cb5b14610146578063a035b1fe14610",
"id": 1
}

cfx_getStorageAt

返回给定合约的存储条目。

参数

  1. BASE32 - 合约地址
  2. QUANTITY - a storage position (see here for more info).
  3. QUANTITY|TAG - (可选,默认为"latest_state")整数纪元号,或字符串 "latest_state""latest_confirmed""latest_checkpoint""earliest",详见 纪元号参数
params: [
"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"0x100",
"latest_state"
]

返回值

DATA - 32 Bytes - the contents of the storage position, or null if the contract does not exist.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getStorageAt","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","0x100","latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x0000000000000000000000001dbda5dd2e952914bc74a802510d0fa59f9d7636",
"id": 1
}

cfx_getStorageRoot

返回给定合约的存储根。

参数

  1. BASE32 - address of the contract.
  2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"latest_state"
]

返回值

Object - A storage root object, or null if the contract does not exist:

  • delta: DATA, 32 Bytes - the storage root in the delta trie, or the string "TOMBSTONE", or null.
  • intermediate: DATA, 32 Bytes - storage root in the intermediate trie, or the string "TOMBSTONE", or null.
  • snapshot: DATA, 32 Bytes - storage root in the snapshot, or the string "TOMBSTONE", or null.

If all three of these fields match for two invocations of this RPC, the contract's storage is guaranteed to be identical. If they do not match, storage has likely changed (or the system transitioned into a new era).

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getStorageRoot","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"delta": "0x0240a5a3486ac1cee71db22b8e12f1bb6ac9f207ecd81b06031c407663c20a94",
"intermediate": "0x314a41f277b678a1dc811a1fc0393b6d30c35e900cb27762ec9e9042bfdbdd49",
"snapshot": "0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470"
},
"id" :1
}

cfx_getSponsorInfo

返回给定合约的赞助者信息。

参数

  1. BASE32 - address of the contract.
  2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"latest_state"
]

返回值

Object - A sponsor info object. If the contract doesn't have a sponsor, then all fields in the object returned will be 0:

  • sponsorBalanceForCollateral: QUANTITY - the sponsored balance for storage.
  • sponsorBalanceForGas: QUANTITY - the sponsored balance for gas.
  • sponsorGasBound: QUANTITY - the max gas that could be sponsored for one transaction.
  • sponsorForCollateral: BASE32 - the address of the storage sponsor.
  • sponsorForGas: BASE32 - the address of the gas sponsor.
  • usedStoragePoints: QUANTITY - storage points already used.
  • availableStoragePoints: QUANTITY - the storage points available for sponsorship.

Hard fork v2.3 provides the introduction for storage points. Refer to CIP-107 for the detailed explanation.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getSponsorInfo","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"sponsorBalanceForCollateral": "0x0",
"sponsorBalanceForGas": "0x0",
"sponsorForCollateral": "CFX:TYPE.NULL:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA0SFBNJM2",
"sponsorForGas": "CFX:TYPE.NULL:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA0SFBNJM2",
"sponsorGasBound": "0x0"
},
"id": 1
}

cfx_getNextNonce

返回给定账户在发送交易时应该使用的下一个nonce值。

参数

  1. BASE32 - address of the account.
  2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
"latest_state"
]

返回值

QUANTITY - integer of the next nonce that should be used by the given address.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getNextNonce","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc" : "2.0",
"result" : "0xe3269d",
"id" : 1
}

cfx_sendRawTransaction

发送一个已签名的交易到网络中进行处理。

参数

  1. DATA, the signed transaction data.
params: [
"0xf86eea8201a28207d0830f4240943838197c0c88d0d5b13b67e1bfdbdc132d4842e389056bc75e2d631000008080a017b8b26f473820475edc49bd153660e56b973b5985bbdb2828fceacb4c91f389a03452f9a69da34ef35acc9c554d7b1d63e9041141674b42c3abb1b57b9f83a2d3"
]

返回值

DATA, 32 Bytes - the transaction hash.

常见错误

Check send raw transaction errors for details.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_sendRawTransaction","params":[{see above}],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0xf5338a6cb85d10acc9108869f94fe322b2dfa2715d16d264676c91f6a0404b61",
"id": 1
}

cfx_call

虚拟地调用一个合约,返回输出数据。 The transaction will not be added to the blockchain. The error message of cfx_call is similar to cfx_estimateGasAndCollateral and error solutions can be found in cfx_estimateGasAndCollateral behaviour#errors.

参数

  1. Object - a call request object:

    • from: BASE32 - (optional, default: random address) address of sender.
    • to: BASE32 - (optional, default: null for contract creation) address of receiver.
    • gasPrice: QUANTITY - (optional, default: 0) gas price provided by the sender in Drip.
    • gas: QUANTITY - (optional, default: 500000000) gas provided by the sender.
    • value: QUANTITY - (optional, default: 0) value transferred in Drip.
    • data: DATA - (optional, default: 0x) the data send along with the transaction.
    • nonce: QUANTITY - (optional, default: 0) the number of transactions made by the sender prior to this one.
  2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
{
"from": "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
"to": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"data": "0xa6f2ae3a",
"gasPrice": "0x2540be400",
"nonce": "0x0"
},
"latest_state"
]

返回值

DATA, Bytes - the output data, or an execution error.

示例
// Request
curl -X POST --data '{"method":"cfx_call","id":1,"jsonrpc":"2.0","params":[{"from":"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg","to":"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","data":"0xa6f2ae3a","gasPrice":"0x2540be400","nonce":"0x0"}]}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x",
"id": 1
}

cfx_estimateGasAndCollateral

虚拟地执行一个交易,返回存储抵押和交易使用的gas的大小估计。 The transaction will not be added to the blockchain.

The response of the cfx_estimateGasAndCollateral interface is contingent on whether specific fields in the input are present or absent. Please refer to cfx_estimateGasAndCollateral behaviour for the detailed information. The error reason and solution can also be found in cfx_estimateGasAndCollateral behaviour#errors.

参数

See cfx_call.

params: [
{
"from": "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
"to": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"data": "0x",
"gasPrice": "0x2540be400",
"nonce": "0x0"
},
"latest_state"
]

返回值

Object - an estimate result object:

  • gasLimit: QUANTITY - the recommended gas_limit.
  • gasUsed: QUANTITY - gas used during execution.
  • storageCollateralized: QUANTITY - size of storage collateralized, in bytes.
示例
// Request
curl -X POST --data '{"method":"cfx_estimateGasAndCollateral","id":1,"jsonrpc":"2.0","params":[{"from":"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg","to":"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","data":"0x","gasPrice":"0x2540be400","nonce":"0x0"}]}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"gasLimit": "0x6d60",
"gasUsed": "0x5208",
"storageCollateralized": "0x80"
},
"id": 1
}

cfx_getLogs

返回与提供的过滤器匹配的日志。

参数

  1. Object - A log filter object:
    • fromEpoch: QUANTITY|TAG - (optional, default: "latest_checkpoint") the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter. Search will be applied from this epoch number.
    • toEpoch: QUANTITY|TAG - (optional, default: "latest_state") the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter. Search will be applied up until (and including) this epoch number.
    • fromBlock: QUANTITY - (optional, default: null). Search will be applied from this specified block.
    • toBlock: QUANTITY - (optional, default: null). Search will be applied untial (and including) this specified block.
    • blockHashes: Array of DATA - (optional, default: null) Array of up to 128 block hashes that the search will be applied to. This will override from/to epoch fields if it's not null.
    • address: Array of BASE32 - (optional, default: null) Search contract addresses. If null, match all. If specified, the log must be produced by one of these contracts.
    • topics: Array - (optional, default: null) 32-byte earch topics. Logs can have 4 topics: the event signature and up to 3 indexed event arguments. The elements of topics match the corresponding log topics. Example: ["0xA", null, ["0xB", "0xC"], null] matches logs with "0xA" as the 1st topic AND ("0xB" OR "0xC") as the 3rd topic. If null, match all.
params: [
{
"fromEpoch": "0x873e12",
"toEpoch": "0x87431b",
"address": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"topics": [["0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5", "0xd7fb65c06987247ab480a21659e16bdf0b5862a19869ec264075d50ab3525435"], null, "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26"],
}
]

返回值

Array - array of log objects corresponding to the matching logs:

  • address: BASE32 - address of the contract that emitted the log.
  • topics: Array of DATA - array of 32-byte event topics.
  • data: DATA - data of log.
  • blockHash: DATA - 32 Bytes - hash of the block containing the log.
  • epochNumber: QUANTITY - epoch number of the block containing the log.
  • transactionHash: DATA, 32 Bytes - hash of the transaction that created the log.
  • transactionIndex: QUANTITY - transaction index in the block.
  • logIndex: QUANTITY - log index in block.
  • transactionLogIndex: QUANTITY - log index in transaction.
示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getLogs","params":[{ "fromEpoch": "0x873e12", "toEpoch": "0x87431b", "address": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp", "topics": [["0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5", "0xd7fb65c06987247ab480a21659e16bdf0b5862a19869ec264075d50ab3525435"], null, "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26"], "limit": "0x2" }],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": [{
"address": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
"blockHash": "0x44531df7bad30d39dfaf844e7c7eb44628467e9bd8474d313397c664a1b9fd14",
"data": "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26",
"epochNumber": "0x873e12",
"logIndex": "0x0",
"topics": [
"0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5",
"0x000000000000000000000000873c4bd4d847bcf7dc066bf4a7cd31dcf182258c",
"0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26",
],
"transactionHash": "0x7c2536d287c9ac5445f30ccfa067d1f4a2d68d6843f4ba25a5e6d20349367eb3",
"transactionIndex": "0x0",
"transactionLogIndex": "0x0"
}, {
"address": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
"blockHash": "0x82da9c6ef8a93036ac75b176230dd88c8fe1727104ab01878b54180f0fa25638",
"data": "0x00000000000000000000000019a3224214fe29107d84af9baa02118b614e46d5",
"epochNumber": "0x87431b",
"logIndex": "0x0",
"topics": [
"0xd7fb65c06987247ab480a21659e16bdf0b5862a19869ec264075d50ab3525435",
"0x000000000000000000000000873c4bd4d847bcf7dc066bf4a7cd31dcf182258c",
"0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26",
],
"transactionHash": "0xef11f262e31bc7ead1d0880b7c90855eb8f0ef7c26a198e805f2b9f1e9bc938b",
"transactionIndex": "0x0",
"transactionLogIndex": "0x0"
}],
"id": 1
}

cfx_getTransactionReceipt

返回一个交易收据,由相应的交易哈希值标识。

参数

  1. DATA, 32 Bytes - hash of a transaction
params: [
"0x53fe995edeec7d241791ff32635244e94ecfd722c9fe90f34ddf59082d814514",
]

返回值

Object - a transaction receipt object, or null when no transaction was found or the transaction was not executed yet:

  • transactionHash: DATA, 32 Bytes - hash of the given transaction.
  • index: QUANTITY - transaction index within the block.
  • blockHash: DATA, 32 字节 - 包含并执行了这个交易的区块的哈希。
  • epochNumber: QUANTITY - epoch number of the block where this transaction was in and got executed.
  • from: BASE32 - 发送者的地址。
  • to: BASE32 - 接收者的地址。 null 当它是一个合约部署交易时为 null
  • gasUsed: QUANTITY - gas used for executing the transaction.
  • gasFee: QUANTITY - gas charged to the sender's account. If the provided gas (gas limit) is larger than the gas used, at most 1/4 of it is refunded.
  • gasCoveredBySponsor: Boolean, true if this transaction's gas fee was covered by the sponsor.
  • storageCollateralized: QUANTITY, the amount of storage collateral this transaction required.
  • storageCoveredBySponsor: Boolean, true if this transaction's storage collateral was covered by the sponsor.
  • storageReleased: Array, array of storage change objects, each specifying an address and the corresponding amount of storage collateral released, e.g., [{ 'address': 'CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG', 'collaterals': '0x280' }]
  • contractCreated: BASE32 - 创建的合约的地址。 null 当它不是一个合约部署交易时为 null
  • stateRoot: DATA, 32 Bytes - hash of the state root after the execution of the corresponding block. 0 if the state root is not available.
  • outcomeStatus: QUANTITY - the outcome status code. 0x0 means success. 0x1 means failed. 0x2 means skipped
  • logsBloom: DATA, 256 Bytes - bloom filter for light clients to quickly retrieve related logs.
  • logs: Array - array of log objects that this transaction generated, see cfx_getLogs.
  • txExecErrorMsg: String, tx exec fail message, if transaction exec success this will be null.
示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getTransactionReceipt","params":["0x53fe995edeec7d241791ff32635244e94ecfd722c9fe90f34ddf59082d814514"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"blockHash": "0xbb1eea3c8a574dc19f7d8311a2096e23a39f12e649a20766544f2df67aac0bed",
"contractCreated": null,
"epochNumber": "0x87431b",
"from": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
"gasCoveredBySponsor": true,
"gasFee": "0x108ca",
"gasUsed": "0x8465",
"index": "0x0",
"logs": [{
"address": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
"data": "0x00000000000000000000000019a3224214fe29107d84af9baa02118b614e46d5",
"topics": ["0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5"]
}],
"logsBloom": "0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000100000000000080000000000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000000000000000000000000",
"outcomeStatus": "0x0",
"stateRoot": "0x1bc37c63c03d7e7066f9427f69e515988d19ebb26998087d75b50d2235e55ee7",
"storageCollateralized": "0x40",
"storageCoveredBySponsor": true,
"storageReleased": [{
"address": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
"collaterals": "0x40"
}],
"to": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
"transactionHash": "0x53fe995edeec7d241791ff32635244e94ecfd722c9fe90f34ddf59082d814514",
"txExecErrorMsg": null
},
"id": 1
}

cfx_getAccount

Returns an account, identified by its address.

参数

  1. BASE32 - address of the account.
  2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"latest_state"
]

返回值

Object - the state of the given account:

  • address: BASE32 - address of the account.
  • balance: QUANTITY - the balance of the account.
  • nonce: QUANTITY - the nonce of the account's next transaction.
  • codeHash: DATA - the code hash of the account.
  • stakingBalance: QUANTITY - the staking balance of the account.
  • collateralForStorage: QUANTITY - the collateral storage of the account.
  • accumulatedInterestReturn: QUANTITY - accumulated interest return of the account.
  • admin: BASE32 - admin of the account.
示例
// Request
curl --data '{"jsonrpc":"2.0","method":"cfx_getAccount","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"accumulatedInterestReturn": "0x0",
"admin": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
"balance": "0x0",
"codeHash": "0x45fed62dd2b7c5ed76a63628ddc811e69bb5770cf31dd55647ca219aaee5434f",
"collateralForStorage": "0x0",
"nonce": "0x1",
"stakingBalance": "0x0"
},
"id": 1
}

cfx_getInterestRate

返回给定纪元的利率。

参数

  1. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"latest_state"
]

返回值

QUANTITY - the interest rate at the given epoch.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getInterestRate","params":["latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x24b675dc000",
"id": 1
}

cfx_getAccumulateInterestRate

返回给定纪元的累积利率。

参数

  1. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"latest_state"
]

返回值

QUANTITY - the accumulate interest rate at the given epoch.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getAccumulateInterestRate","params":["latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x3c35a9e557dc9ef76719db0226f",
"id": 1
}

cfx_checkBalanceAgainstTransaction

检查用户的余额是否足够发送一个带有指定gas和存储限制的交易到指定合约。 如果用户可以支付执行和存储的预付款,或者这些费用由合约赞助,那么余额就足够了。

参数

  1. BASE32, account address
  2. BASE32, contract address
  3. QUANTITY, gas limit
  4. QUANTITY, gas price
  5. QUANTITY, storage limit
  6. QUANTITY|TAG, (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter.
params: [
"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"0x5208",
"0x2540be400",
"0x0",
"0xbf63"
]

返回值

  • isBalanceEnough: Boolean - indicate balance is enough for gas fee and collateral storage
  • willPayCollateral: Boolean - false if the transaction is eligible for storage collateral sponsorship, true otherwise.
  • willPayTxFee: Boolean - false if the transaction is eligible for gas sponsorship, true otherwise.
示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_checkBalanceAgainstTransaction","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp", "0x5208", "0x2540be400", "0x0", "0xbf63"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"isBalanceEnough": true,
"willPayCollateral": true,
"willPayTxFee": true
},
"id": 1
}

cfx_getSkippedBlocksByEpoch

Returns the list of non-executed blocks in an epoch. By default, Conflux only executes the last 200 blocks in each epoch (note that under normal circumstances, epochs should be much smaller).

参数

  1. QUANTITY|TAG - integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"0xba28"
]

返回值

  • Array of block hashes
示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getSkippedBlocksByEpoch","params":["0xba28"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": [],
"id": 1
}

cfx_getConfirmationRiskByHash

Returns the confirmation risk of a given block, identified by its hash.

参数

  1. DATA, 32 Bytes - the block hash.
params: [
"0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c"
]

返回值

  • QUANTITY, the integer confirmation risk, or null if the block does not exist.
示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getConfirmationRiskByHash","params":["0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": "0x2af31dc4611873bf3f70834acdae9f0f4f534f5d60585a5f1c1a3ced1b",
"id": 1
}

cfx_getStatus

Returns the node status.

参数

无。

返回值

  • bestHash: DATA - hash of the latest epoch's pivot block
  • blockNumber: QUANTITY - total block number
  • chainId: QUANTITY - chainId
  • networkId: QUANTITY - networkId
  • ethereumSpaceChainId: QUANTITY - eSpace's chainId (Added from v2.0)
  • epochNumber: QUANTITY - latest epoch number
  • latestCheckpoint: QUANTITY - latest checkpoint epoch number
  • latestConfirmed: QUANTITY - latest confirmed epoch number
  • latestFinalized: QUANTITY - latest finallized epoch number (Added from v2.0)
  • latestState: QUANTITY - latest state epoch number
  • pendingTxNumber: QUANTITY - current pending transaction count
示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getStatus","id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"bestHash": "0xe4bf02ad95ad5452c7676d3dfc2e57fde2a70806c2e68231c58c77cdda5b7c6c",
"chainId": "0x1",
"networkId": "0x1",
"blockNumber": "0x1a80325",
"epochNumber": "0xaf28ab",
"latestCheckpoint": "0xada520",
"latestConfirmed": "0xaf2885",
"latestState": "0xaf28a7",
"latestFinalized": "0x2a420c",
"ethereumSpaceChainId": "0x22b9",
"pendingTxNumber": "0x0"
},
"id": 1
}

cfx_clientVersion

Returns the conflux-rust version.

参数

无。

返回值

  • STRING - the client version
示例
//Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_clientVersion","id":1}' -H "Content-Type: application/json" localhost:12539

//Result
{
"jsonrpc": "2.0",
"result": "conflux-rust-0.6.3",
"id": 1
}

cfx_getBlockRewardInfo

Returns the reward info for all executed blocks in the specified epoch.

参数

  1. QUANTITY|TAG - integer epoch number, or the string "latest_checkpoint", see the epoch number parameter
params: [
"0x5ee248"
]

Please note that reward calculation is delayed so it might not be available for the latest few epochs (including "latest_state").

返回值

Array - array of reward info objects

  • blockHash: DATA - the block hash
  • author: BASE32 - the address of block miner
  • totalReward: QUANTITY - total reward of the block including base reward, tx fee, staking reward
  • baseReward: QUANTITY - base reward
  • txFee: QUANTITY - tx fee
示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockRewardInfo","params":["0x5ee248"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": [
{
"author": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
"baseReward": "0x9ccda666a9516000",
"blockHash": "0xa4a409ea5f1d31e787cd5e20a3eec1fd43851d29608d2de98fb127f518e1a211",
"totalReward": "0x9ccdca639a29ece1",
"txFee": "0x0"
}
],
"id": 1
}

cfx_getBlockByHashWithPivotAssumption

Returns the requested block if the provided pivot hash is correct, returns an error otherwise.

参数

  • DATA, block hash
  • DATA, assumed pivot hash
  • QUANTITY, integer epoch number.
params: [
"0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c",
"0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c",
"0xba28"
]

返回值

See cfx_getBlockByHash.

示例
// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockByHashWithPivotAssumption","params":["0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c", "0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c", "0xba28"],"id":1}' -H "Content-Type: application/json" localhost:12539

结果参见 cfx_getBlockByHash.


cfx_getDepositList

Returns the deposit list of the given account, identified by its address.

参数

  1. BASE32 - address of the account.
  2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u",
"latest_state"
]

返回值

Array - array of deposit info objects:

  • accumulatedInterestRate: QUANTITY - the accumulated interest rate at the time of the deposit.
  • amount: QUANTITY - the number of tokens deposited.
  • depositTime: QUANTITY - the time of the deposit.
示例
// Request
curl --data '{"jsonrpc":"2.0","method":"cfx_getDepositList","params":["cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": [{
"accumulatedInterestRate": "0x3c4517ac75006c913c52c2402e8",
"amount": "0x8ac7230489e80000",
"depositTime": 3135949
}, {
"accumulatedInterestRate": "0x3c451870afdac66f40804d95742",
"amount": "0x8ac7230489e80000",
"depositTime": 3136255
}],
"id": 1
}

cfx_getVoteList

Returns the vote list of the given account, identified by its address.

参数

  1. BASE32 - address of the account.
  2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u",
"latest_state"
]

返回值

Array - array of vote info objects:

  • amount: QUANTITY - the number of tokens locked.
  • unlockBlockNumber: QUANTITY - the block number at which the locked tokens are released.

For getting the current block number, please refer to conflux-rust#1973.

示例
// Request
curl --data '{"jsonrpc":"2.0","method":"cfx_getVoteList","params":["cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": [{
"amount": "0x8ac7230489e80000",
"unlockBlockNumber": 1000000000000
}],
"id": 1
}

cfx_getSupplyInfo

Returns summary supply info of the entire chain.

参数

无。

返回值

Object - Object include the supply summary info.

  • totalIssued: QUANTITY - Amount of total issued CFX in Drip
  • totalCollateral: QUANTITY - Amount of total storage collateraled CFX in Drip
  • totalStaking: QUANTITY - Amount of total staking CFX in Drip
  • totalCirculating: QUANTITY - Amount: TotalIssued - FourYearUnlock - TwoYearUnlock
  • totalEspaceTokens: QUANTITY - Amount of total eSpace CFX in Drip (Added in Conflux-Rust v2.0.1)

示例

// Request
curl --data '{"jsonrpc":"2.0","method":"cfx_getSupplyInfo","params":[],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
"jsonrpc": "2.0",
"result": {
"totalCirculating": "0x1ed09beade67915041ca95cb0ea3b",
"totalCollateral": "0x2b95bdcc39b610000",
"totalIssued": "0x1ed09ced5cda57e32eec33328ea3b",
"totalStaking": "0x56bc75e2d63100000"
},
"id": "15922956697249514502"
}

cfx_getAccountPendingInfo

Returns transaction pool pending info of one account

参数

  1. BASE32 - address of the account.
params: [
"cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u"
]

返回值

Object - Object include account's pending info.

  • localNonce: QUANTITY - User's transaction pool nonce that can be used for next transaction.
  • pendingNonce: QUANTITY - User's current pending nonce
  • pendingCount: QUANTITY - Count of pending transaction
  • nextPendingTx: DATA - Hash of next pending transaction

示例

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getAccountPendingInfo","params":["cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Response
{
"jsonrpc": "2.0",
"result": {
"localNonce": "0x1ed",
"nextPendingTx": "0x0000000000000000000000000000000000000000000000000000000000000000",
"pendingCount": "0x0",
"pendingNonce": "0x0"
},
"id": "15922956697249514502"
}

cfx_getAccountPendingTransactions

Returns pending transactions in pool of one account

参数

  1. BASE32 - address of the account.
  2. [QUANTITY] - Optional start nonce to return
  3. [QUANTITY] - Optional limit of pending transactions to return
params: [
"cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u"
]

返回值

Object - Object include account's pending transaction info.

  • firstTxStatus: OBJECT - An object with only one field pending, it's value is the first pending transaction's status. Only have three case futureNonce, notEnoughCash. Or just a string ready
  • pendingCount: QUANTITY - Count of pending transactions
  • pendingTransactions: ARRAY - Array of pending transaction

示例

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getAccountPendingTransactions","params":["cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Response
{
"jsonrpc": "2.0",
"result": {
"firstTxStatus": {
"pending": "futureNonce"
},
"pendingCount": "0x1",
// Reference transaction example
"pendingTransactions": [
{
"...": "..."
}
]
},
"id": "15922956697249514502"
}

cfx_getBlockByBlockNumber

Returns information about a block, identified by its block number (block's tree-graph order number).

Added at

Conflux-rust v1.1.5

参数

  1. QUANTITY - the block number.
  2. Boolean - 如果 true,返回完整的交易对象 If false, only the hashes of the transactions are returned
params: [
"0x1000",
true
]

返回值

See cfx_getBlockByHash.

示例

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockByBlockNumber","params":["0x1000", false],"id":1}' -H "Content-Type: application/json" localhost:12539

结果参见 cfx_getBlockByHash.


cfx_getPoSEconomics

Returns PoS economics summary info.

Added at

Conflux-rust v2.0.0

参数

  1. [QUANTITY] - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

返回值

  • distributablePosInterest: QUANTITY Total distributable PoS interest (Unit is Drip)
  • lastDistributeBlock: QUANTITY Last block that distributable PoS interest
  • totalPosStakingTokens: QUANTITY Total tokens staked in PoS (Unit is Drip)

示例

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw ' {
"jsonrpc": "2.0",
"id": "15922956697249514502",
"method": "cfx_getPoSEconomics",
"params": []
}'
{
"jsonrpc": "2.0",
"result": {
"distributablePosInterest": "0x6fd7fd91140603a45caff2",
"lastDistributeBlock": "0x100",
"totalPosStakingTokens": "0x29cbb85e5a6e849c00000"
},
"id": "15922956697249514502"
}

cfx_getPoSRewardByEpoch

Get rewards information of a PoS epoch by it's correspond PoW epoch number. Only PoW epoch happen's at PoS epoch end will have rewards information. Others will return null.

Added at

Conflux-rust v2.0.0

参数

  1. QUANTITY: PoW epoch number
params: [
"0x4a"
]

返回值

  • accountRewards: Array of AccountReward
  • powEpochHash: HASH - the hash value of the PoW block when the rewards are made
AccountReward
  • posAddress: ADDRESS - PoS account address
  • powAddress: BASE32 - PoW account address
  • reward: QUANTITY - the number of rewards, in the unit of Drip
示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_getPoSRewardByEpoch",
"params": ["0x4a"]
}'

Response

{
"jsonrpc": "2.0",
"result": {
"accountRewards": [
{
"posAddress": "0x459b19e745eb410c3696ff1ed15f9de9bb46aa5fefc27b0b6e8b8d7aaadfe8c0",
"powAddress": "NET8888:TYPE.USER:AAKSNR7XKKFFAM17MNESKAGU076T8FAG3YJ6PTHN16",
"reward": "0x14931d20aa21eae3e6f"
},
{
"posAddress": "0x046ca462890f25ed9394ca9f92c979ff48e1738a81822ecab96d83813c1a433c",
"powAddress": "NET8888:TYPE.USER:AAPXUPNXG96GZ4077DAV0151K7P8498N9A6DMAWK1N",
"reward": "0x2d49549e023888cd390"
}
],
"powEpochHash": "0x361cb0f19fd13c30da467d20a84ef01aabcd55e9812c5e2fd0721ea11a52e9f1"
},
"id": 1
}

cfx_getParamsFromVote

Returns DAO vote params info

Added at

Conflux-rust v2.1.0

参数

  1. QUANTITY: (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter
params: [
"0x4a"
]

返回值

  • powBaseReward: QUANTITY - The PoW base reward amount
  • interestRate: QUANTITY - The PoS interest rate
  • storagePointProp: QUANTITY - The proportion of sponsored storage will transfer to storage point
示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_getParamsFromVote",
"params": ["0x4a"]
}'

Response

{
"jsonrpc": "2.0",
"result": {
"powBaseReward": "0x1",
"interestRate": "0x2",
},
"id": 1
}

cfx_newFilter

This function creates a log filter for tracking usage. It returns a log filter ID, which can be employed through the cfx_getFilterChanges command to retrieve logs newly generated from recently executed transactions. The from* field in this context will be disregarded by this RPC (Remote Procedure Call). This function can also be used via cfx_getFilterLogs to retrieve all logs that match the filter criteria. In this instance, the from* fields are considered.

It is important to note that the filter object will expire after a certain period of inactivity from the last request, typically 60 seconds. This expiration duration is configured by the node. To avoid losing log tracking, it is recommended to refresh or recreate the filter as necessary.

参数

  1. Object - A log filter object:
    • fromEpoch: QUANTITY|TAG - (optional, default: "latest_checkpoint") the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter. The start epoch to search. Noting that [cfx_getFilterChanges] will ignore this parameter.
    • toEpoch: QUANTITY|TAG - (optional, default: "latest_state") the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter. Search will be applied up until (and including) this epoch number.
    • fromBlock: QUANTITY - (optional, default: null). The start block to search. Noting that [cfx_getFilterChanges] will ignore this parameter.
    • toBlock: QUANTITY - (optional, default: null). Search will be applied untial (and including) this specified block.
    • blockHashes: Array of DATA - (optional, default: null) Array of up to 128 block hashes that the search will be applied to. This will override from/to epoch fields if it's not null.
    • address: Array of BASE32 - (optional, default: null) Search contract addresses. If null, match all. If specified, the log must be produced by one of these contracts.
    • topics: Array - (optional, default: null) 32-byte earch topics. Logs can have 4 topics: the event signature and up to 3 indexed event arguments. The elements of topics match the corresponding log topics. Example: ["0xA", null, ["0xB", "0xC"], null] matches logs with "0xA" as the 1st topic AND ("0xB" OR "0xC") as the 3rd topic. If null, match all.
params: [
{
"fromEpoch": "0x873e12",
"toEpoch": "0x87431b",
"address": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
"topics": [["0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5", "0xd7fb65c06987247ab480a21659e16bdf0b5862a19869ec264075d50ab3525435"], null, "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26"],
}
]

返回值

QUANTITY - the id of the log filter object.

示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_newFilter",
"params": ["fromEpoch": "0x873e12"]
}'

Response

{
"jsonrpc": "2.0",
"result": "0x09294f7b3b63b52d3771fcafb7b7ed61",
"id": 1
}

cfx_newBlockFilter

Create a block filter for following up usage. Returns the block filter id which can be used via cfx_getFilterChanges to retrieve latest executed blocks.

It is important to note that the filter object will expire after a certain period of inactivity from the last request, typically 60 seconds. This expiration duration is configured by the node. To avoid losing log tracking, it is recommended to refresh or recreate the filter as necessary.

参数

无。

返回值

QUANTITY - the id of the block filter object.

示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_newBlockFilter",
"params": []
}'

Response

{
"jsonrpc": "2.0",
"result": "0x09294f7b3b63b52d3771fcafb7b7ed61",
"id": 1
}

cfx_newPendingTransactionFilter

Create a pending transaction filter for following up usage. Returns the transaction filter id which can be used via cfx_getFilterChanges to retrieve ready but not executed transactions.

备注

The created filter will only filter out ready transactions, which means a pending transaction with a future nonce will never be listed via corresponding cfx_getFilterChanges.

Besides, it is important to note that the filter object will expire after a certain period of inactivity from the last request, typically 60 seconds. This expiration duration is configured by the node. To avoid losing log tracking, it is recommended to refresh or recreate the filter as necessary.

参数

无。

返回值

QUANTITY - the id of the pending transaction filter object.

示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_newPendingTransactionFilter",
"params": []
}'

Response

{
"jsonrpc": "2.0",
"result": "0x09294f7b3b63b52d3771fcafb7b7ed61",
"id": 1
}

cfx_getFilterChanges

Get filter changes since last retrieve. Return value depends on which type of filter id is provided. Filter id can be returned from current RPCs:

备注

The created filter will only filter out ready transactions, which means a pending transaction with a future nonce will never be listed via corresponding cfx_getFilterChanges.

参数

  1. QUANTITY - the filter id.
params: [
"0x09294f7b3b63b52d3771fcafb7b7ed61"
]

返回值

Array - array of log receipts (same format as cfx_getLogs return value), block hashes, or transaction hashes depending on the input.

示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_getFilterChanges",
"params": [0x09294f7b3b63b52d3771fcafb7b7ed61]
}'

Response

{
"jsonrpc": "2.0",
"result": ["0xcc103077ede14825a5667bddad79482d7bbf1f1a658fed6894fa0e9287fc6be1"],
"id": 1
}

cfx_getFilterLogs

Returns all logs matching the log filter (Unlike cfx_getFilterChanges, from* fields still work).

参数

  1. QUANTITY - the filter id.
params: [
"0x09294f7b3b63b52d3771fcafb7b7ed61"
]

返回值

Array - array of log receipts (same as cfx_getLogs).

示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_getFilterLogs",
"params": [0x09294f7b3b63b52d3771fcafb7b7ed61]
}'

Response

Refer to cfx_getLogs.

cfx_uninstallFilter

Uninstall the specified filter. Returns a bool whether the uninstallation succeeds.

参数

  1. QUANTITY - the filter id.
params: [
"0x09294f7b3b63b52d3771fcafb7b7ed61"
]

返回值

Boolean - whether the uninstallation succeeds.

示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_uninstallFilter",
"params": [0x09294f7b3b63b52d3771fcafb7b7ed61]
}'

Response

{
"jsonrpc" : "2.0",
"result" : true,
"id" : 1
}

cfx_getEpochReceipts

Returns all transaction receipts within the specific epoch.

备注

This method is supported by Confura if api key is provided. For normal nodes, this method is also supported, but can only be accessed in local environment.

参数

  1. QUANTITY|TAG - the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter.
  2. Boolean - whether eSpace transaction receipts will be included in the return value, defaults to false.
params: [
"0x1000",
true
]

返回值

Array - This is a two-dimensional array of transaction receipts. Each sub-array represents transactions within a block. Noting an extra field of space will be added to each transaction receipt if the second parameter is set to true. The value of space will be either native meaning this is a core space transaction receipt or evm meaning the transaction is from eSpace.

示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_getEpochReceipts",
"params": ["0x1000", true]
}'

Response

{
"jsonrpc": "2.0",
"id": 1,
"result": [
[],
[
{
"transactionHash": "0x386442f263e3d4b382f97efe577e3bb5956872a322936b8581133be4ec392153",
"index": "0x0",
"blockHash": "0x6ebb905fbfcc80506080e639b80d7bc696dab2f6168e01daedf3c15597987da2",
"epochNumber": "0x7e6f164",
"from": "cfxtest:aakvz2e5nt82c9nvbbg84hzbrjy53nsdf20ng5wuj1",
"to": "cfxtest:acbpnfz9mu42a6ubhdcyadj04m2w8wt6sex7atgyg6",
"gasUsed": "0x15a1b",
"accumulatedGasUsed": "0x15a1b",
"gasFee": "0x50957e574e00",
"contractCreated": null,
"logs": [],
"logsBloom": "0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
"stateRoot": "0x6ef7bcc4d8cb7c777a587a22002930c5d44e62e1047043c44dd44f89d16e462d",
"outcomeStatus": "0x0",
"txExecErrorMsg": null,
"gasCoveredBySponsor": false,
"storageCoveredBySponsor": false,
"storageCollateralized": "0x0",
"storageReleased": [],
"space": "native"
}
]
]
}

cfx_getCollateralInfo

Returns current chain collateral status info.

参数

  1. QUANTITY|TAG - (optional, default: "latest_state") the epoch number, or the string ``"latest_state","latest_confirmed","latest_checkpoint"or"earliest"`, see the epoch number parameter.
params: [
"latest_state",
]

返回值

Object - The storage collateral info object of the chain.

  • totalStorageTokens
  • convertedStoragePoints - converted storage points of the total chain
  • usedStoragePoints - storage points already used for sponsorship
示例

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
"id": 1,
"jsonrpc": "2.0",
"method": "cfx_getCollateralInfo",
"params": ["latest_executed"]
}'

Response

{
"jsonrpc": "2.0",
"id": 1,
"result": {
"totalStorageTokens": "0x12c6e8ec75a2740998000",
"convertedStoragePoints": "0x485ec66",
"usedStoragePoints": "0x290bc0"
}
}